01253 886698

insidelinemodels.com

×
 x 

Cart empty
Shopping cartCart empty
Sanwa SA101A32171A Sanwa MT-44 Radio Set - with RX-482 2
Sanwa SA101A32171A Sanwa MT-44 Radio Set - with RX-482 1

Sanwa SA101A32171A Sanwa MT-44 Radio Set - with RX-482

Sanwa MT-44 Radio Set - with RX-482. Introducing the all-new MT-44 4-channel 2.4GHz radio system. The follow-up model of the popular MT-4S offers a completely new case design with a large white back-lit display and an adjustable handle that can be popped out for transpiration and retracted for normal use. The telemetry transmitter offers a range of functions such as ambient temperature display MicroSD card support for extended model memory and it makes use of lightweight AAA 3-cell or 1S LiPo batteries for an ultra light weight. The MT-44 supports Sanwa’s SHR and SSR modulation and it is compatible with most FH4T and FH3 receivers. Other features include chargeability via an USB port and the radio system will become available including a range of receivers such as the RX-482 RX-481 RX-472 or RX-471.
Stock Level: 0
Part Number: Sanwa SA101A32171A
Array
£242.99
Our Price: £242.99
Description

Introducing the all-new MT-44 4-channel 2.4GHz radio system.

The follow-up model of the popular MT-4S offers a completely new case design with a large white back-lit display and an adjustable handle that can be popped out for transpiration and retracted for normal use.

The telemetry transmitter offers a range of functions such as ambient temperature display, MicroSD card support for extended model memory, and it makes use of lightweight AAA 3-cell or 1S LiPo batteries for an ultra light weight.

The MT-44 supports Sanwa’s SHR and SSR modulation and it is compatible with most FH4T and FH3 receivers.

Other features include chargeability via an USB port and the radio system will become available including a range of receivers such as the RX-482, RX-481, RX-472 or RX-471.

- HIGH RESOLUTION DISPLAY
The same detailed dot as M12S enables so clear display.
Three kind of telemetry data can be displayed simultaneously because of gray scale display.

- BEST POSITION FOR STEERING / THROTTLE
Steering/Throttle is arranged in the best position for operation.
Drop Down is used as standard postion.

- THREE AAA BATTERIES
Three AAA batteries allows to be not only compact but also light.

- USB CHARGE
When used with optional Li-Po 1 cell battery, weight become lighter and it can be changed from USB input.

SYSTEM: 2.4GHz FH4T/FH3 ¦4CH ¦Transmitter: TX-471 ¦Receiver: RX-482

[New features]
Movable Carrying Handle Quick Setup Wizard Safety Link Racing Mode Customized Menu Micro SD card-compatible Telemetry Switch Clock Circumstance Temperature Display CSV Output for LOG data CODE 10-compatible (Naming support) Simultaneous three telemetry data display Three AAA Batteries Li-Po 1 cell-compatible (USB change support)
[Other functions]
Large full dot LCD monitor Wight LED back light Full adjustable trigger Telemetry function Built-in antenna Multi Menu Selector ST/TH Tension Adjuster Dual Rate End Point Adjuster Anti-lock Brake Servo Speed Offset Trim/Sub trim Servo Reverse Curve (Exponential /Adjustable Rate Control) AUX1 (Movement type for 3CH. it's the same as MT-4S function.) AUX2 (Movement type for 4CH. it's the same as MT-4S function.) Fail safe (power/ battery) Timer (lap/ interval/ down) Lap Logger 20 model memory (when used with SD card, 250 models is available.) Model Name (12 letters) Model (Select/ Clear/ Copy) Direct Model Select Trim Type (Center/ parallel) Throttle Type (70:30 / 50:50) RF MODE Setting (FH4T/FH3) Response Mode Setting (NOR/SHR/SSR)* Key Assign(SW/TRIM/DIAL/LEVER)
AUX TYPE SETTING
·CODE AUX (w/ Naming function)
·STEP AUX (Step 1 - 100)
·POINT AUX (2 - 6 point)
·4WS MIXING (Front/Rear/Normal(coordinate phase)/Reverse(opposite phase))
·MOA MIXING (FWD/4WD/RWD)
·AUX MIXING (ST MIXING/ TH MIXING)
Buzzer(scale/volume) Transmitter Battery Alarm LCD Contrast Volume Adjustment Mechanical Rudder Angle Small Grip Pad
Compatible Receivers:
*Telemetry-compatible(RX-482, RX-472, RX-47T, RX-462, RX-461)
*Non-Telemetry-compatible(RX-481, RX-481WP, RX-471 Dual ID, RX-471W, RX-471, RX-451R, RX-451, RX-381, RX-380)

[SSL(SANWA Synchronized Link) Sysytem]
SANWA NEW SSL SYSTEM
When used with compatible RX-472, RX-482, Super Vortex Series, SV-Plus Series, the setting of ESC etc. by Transmitter is available through SSL functions while driving.
Since the setting can be done without the stop of car, the detailed adjustment in accordance with Race conditions
is available without interruption of Intervals and the change of machine conditions.
[Response of Telemetry System]
It is often said that telemetry system reduce response speed. However, SANWA Original Data Processing and Algorithm Design makes Telemetry possible without response speed reduction.
Our Excellent Telemetry System has no response speed reduction.
With our telemetry system, the precious race data will help the next race setting and driving.
[Response Mode]
Please do not use Analog Servo for SHR mode or SSR mode.
If analog servo is used for SHR mode or SSR mode, the servo will be broken and will not work.
Digital servo (SRG series, Digital ERG series, SDX series) can be used both for NOR mode and SHR mode.
SSR mode can be used only by SRG series servo.
In SHR or SSR mode, BL-FORCE, BL-SPORT, F3300, SBL-02 and SBL-03CR do not work.
Please use NOR mode for the above ESC.
About Version Update Program

How to update firmware
1 Please download the version update program ;

Decompress the file.
2 Insert micro SD card into your PC.
3 Make the new folder named "MT-44" in the root of micro SD card.
4 Make the new folder named "update" in the above "MT-44" folder.
5 Copy and Paste the decompressed file "MT-44.prg" into the above "update" folder.
6 Remove micro SD card from your PC and insert it into MT-44 with MT-44 off.
7 Power on MT-44. And update the software as the following process.
SYSTEM > FIRMWARE > FIRMWARE [UPDATE]
In the firmware menu, both the current version and new version will be displayed.
*After updating the firmware, you cannot go back to the old firmware.

 

Video on Sanwa MT44

 

RX-482

商品画像

 

●2.4GHz FHSS4 Spread spectrum system 4ch
●SSL support (ESC: Super Vortex Series etc.)
●Built-in Antenna
●Sanwa Super Response (SSR) support

 

Frequency

2.4GHz FHSS4

Channel

4ch

Nominal Input Voltage

3.7V~7.4V

Dimensions

18.2x24.4x27.1mm

Weight

7.1g

Compatible radio

M12, Exzes Z, MT-4S, MT-4(No SSL support)

 

EFERENCE: HOW TO EQUIP IN EP CAR (PDF Download)]
 
*NOTICE (When Li-Po 2cell Battery, 7.4V is used.)*
Battery fail safe of transmitters except for M12, Exzes Z are set between 3.5V to 5.0V.
Therefore since the voltage of Li-Po Battery cannot be set, battery fail safe do not work.
If Li-Po battery is used, please check your driving time and replace battery safely.
We shall not be liable for any trouble about battery fail safe when Li-Po battery is used.